Sunday, June 12, 2011

what is cnc turning


CNC Turning Center
CNC Turning Center
CNC Turning of engine component
CNC Turning of engine component
Pulley Made by CNC Turning
Pulley Made by CNC Turning
CNC Turned Aluminum Shaft Retainer
CNC Turned Aluminum Shaft Retainer
CNC Turned and Milled Part
CNC Turned and Milled Part






CNC turning produces parts by "turning" rod material and feeding a cutting tool into the turning material. In CNC turning the cutter can be fed into the rotating workpiece at a variety of angles and many tool shapes can be used.

CNC turning provides an economical way to make parts that are commonly symmetrical about an axis of revolution (e.g. a chess pawn). Shapes that can be made using CNC turning include a variety of plain, taper, contour, fillet and radius profiles plus threaded surfaces. Although many turned parts use a single axis of revolution, there can be multiple axiis to allow more flexibility (e.g. camshafts). CNC turning can be combined with CNC milling and other processes to make more diverse shapes.

CNC turning can shape most rigid materials such as:

Examples of parts made by CNC turning include:

Normally the tooling types needed for a job are stock items.

Cost optimization options for CNC turning include:

  • Reducing complexity
  • Minimizing the amount of material removed
  • Avoiding difficult shapes such as very long thin structures.

CNC Turning Design Considerations

  • As the turning process applies pressure to the material, weak shapes that may flex can be difficult to machine, such as long thin structures.
  • CNC turning generates a cut surface with fine helical feed marks resulting from the rotation of the part and movement of the cutter - consider specifying a desired surface roughness.
  • Bored holes become difficult when the ratio of the depth to diameter is high.





1 comment:

  1. The diagram below illustrates the coordinates system as related to the bed of the lathe. Being a lathe, it has a headstock cnc turning with a spindle and a tailstock so that the job can be clamped securely and held that way and then spun at selected speeds to enable cutting operations.

    ReplyDelete