Wednesday, June 15, 2011

CNC Measuring Instruments

The below listed instruments are base on Mitutoyo catalag

Vernier Caliper


FEATURES:

  • The thin blade type jaws fit into very small grooves and making previously difficult outside measurements far easier to obtain.
  • The OD measuring faces are carbide-tipped.
  • With depth bar.
  • With SPC data output.
  • Supplied in fitted plastic case.

Technical Data

Accuracy: Refer to the list of specifications. (excluding quantizing error for digital models)
Resolution*: 0.01mm or .0005"/0.01mm
Graduation**: 0.05mm
Display*: LCD
Length standard*: ABSOLUTE electrostatic capacitance type linear encoder
Max. response speed*: Unlimited
Battery*: SR44 (1 pc.), 938882
Battery life*: Approx. 3.5 years under normal use
*Digital models **Analog models

Function of Digital Model

Origin-set, Zero-setting, Power On/Off, Data output, inch/mm conversion (inch/mm models)
Alarm: Low voltage, Counting value composition error


Outside Micrometer

FEATURES:

  • Hammertone-green, baked-enamelfinished frame.
  • Ratchet Stop or Friction Thimble for exact repetitive readings.
  • With a standard bar except for 0-25mm model.

Technical Data

Graduation: 0.01mm, 0.001mm
Flatness: 0.6µm for models up to 300mm
1µm for models over 300mm
Parallelism: (2+R/100)µm, R=max. range (mm)
Measuring faces: Carbide tipped

Note:Models with a range up to 1000mm are available


Digi Depth Vernier Caliper
FEATURES:

  • ABSOLUTE Digimatic Depth Gage can keep track of the origin point once set for the entire life of the battery.
  • Base and measuring faces are hardened and micro-lapped.
  • Optional wider extension base are available. (up to 450mm range models)
  • With SPC data output.

Technical Data
Resolution: 0.01mm or .0005"/0.01mm
Repeatability: 0.01mm
Display: LCD
Length standard: ABSOLUTE electrostatic capacitance (electromagnetic induction)* type linear encoder
Max. response speed: Unlimited
Battery: SR44 (1 pc.), 938882
Battery life: Approx. 20,000 hours (3 years)* under normal use
Dust/Water protection level: IP67*
*Coolant Proof models

Function
Origin-set, Zero-setting, Automatic power on/off, Data output, inch/mm conversion (inch/mm models)
Alarm: Low voltage, Counting value composition error

Optional Accessories
959143: Data hold unit
959149: SPC cable with data switch (40” / 1m)
959150: SPC cable with data switch (80” / 2m)
05CZA624: SPC cable with data switch (40” / 1m)*
05CZA625: SPC cable with data switch (80” / 2m)*
*for IP67 models

Depth Micrometer

FEATURES:

  • Ø4mm measuring rod.
  • With measuring rod clamp.
  • With carbide-tipped measuring rod model is available.
  • With ratchet stop for constant force.

Technical Data
Accuracy: ±3µm for micrometer head feed
Graduation: 0.01mm or .001¡±
Flatness of reference face: 1.3¥ìm for 63.5mm width base, 2¥ìm for 101.6mm width base
Flatness of measuring rod face: 0.3¥ìm
Parallelism between reference face and measuring rod face:
(4+L/50)¥ìm, L=Max. measuring length (mm)
Measuring rod diameter: 4mm
*with carbide-tipped measuring rod



Dial Depth Vernier

FEATURES:

  • Easier and faster reading of dial.
  • Made of hardened stainless steed.
  • Base and measuring faces are hardened and micro-lapped.
  • Optional wider extension base are available.

Technical Data
Dial reading: 0.05mm or .001”
Base size: 100x6.5mm (WxT)


Vernier Depth Gage

FEATURES:

  • Made of hardened stainless steel.
  • Base and measuring faces are hardened and micro-lapped.
  • Optional wider extension base are available.(up to 450mm range models

Technical Data
Graduation:0.05mm,0.02mm or .001 in


Tubular Inside Micrometer

FEATURES:

  • With locking clamp.
  • Zero point can be readjusted by twisting the micrometer head sleeve. A key wrench is supplied.
  • Clear, crisp graduations on the satin chrome finished micrometer head.
  • Carbide-tipped measuring faces.
  • Supplied in fitted plastic case.Over 200mm/8in supplied in wooden case.

Technical Data

Graduation: 0.01mm or .001"


Bore Gages

FEATURES:

Mitutoyo offers a complete selection of Bore Gages,all of them with interchangeable anvils and necessary accessories to perform close tolerance ID measurements.
  • Most popular Bore Gages.
  • Carbide-tipped contact points for durability.
  • The dial indicator is fully protected by a rugged cover.
  • Optional extension rods can be attached for measuring deep holes.

Technical Data

Accuracy: 5µm / .0002”
Indication stability: 2µm / .00008”
Graduation: 0.01mm, 0.001mm, .0005" or .0001"

Optional Accessories
953549: 125mm / 4.92” Extension rod for 18-35mm / .7 -1.4" models
953552: 125mm / 4.92” Extension rod for 35-160mm / 1.4 - 6.5" models
953557: 125mm / 4.92” Extension rod for 160-400mm / 6.5 - 16" models
953550: 250mm / 9.84” Extension rod for 18-35mm / .7 - 1.4" models
953553: 250mm / 9.84” Extension rod for 35-160mm / 1.4 - 6.5" models
952361: 250mm / 9.84” Extension rod for 160-400mm / 6.5 - 16" models
953551: 500mm / 19.69” Extension rod for 18-35mm / .7 - 1.4" models
953554: 500mm / 19.69” Extension rod for 35-160mm / 1.4 - 6.5" models
953558: 500mm / 19.69” Extension rod for 160-400mm / 6.5 - 16" models
953555: 750mm / 29.53" Extension rod for 35-160mm / 1.4 - 6.5" models
953559: 750mm / 29.53” Extension rod for 160-400mm / 6.5 - 16" models
953556: 1000mm / 39.37” Extension rod for 35-160mm / 1.4 - 6.5" models
953560: 1000mm / 39.37” Extension rod for 160-400mm / 6.5 - 16" models



Vernier Height Gage

FEATURES:

  • The Light Weight Height Gage is designed for scribing from a vertical base or for small parts.
  • Stain chrome finished scales for glare-free reading.
  • Beam and slider are made of stainless steel.
  • Carbide-tipped scriber is provided.

Standard Scriber Provided
Carbide-tipped scriber (900173) and scriber clamp (901338)

Optional Accessories
953639: Holding bar for test indicator (length: 50mm)
900322: Swivel clamp used with holding bar




No comments:

Post a Comment